Materials, Manufacturing and Industrial Engineering0 / 6 done
- 1ME 2024 · 1 mark · MCQ · EasyThe “Earing” phenomenon in metal forming is associated with
- 2ME 2024 · 1 mark · MCQ · EasyThe allowance provided to a pattern for easy withdrawal from a sand mold is
- 3ME 2024 · 1 mark · MCQ · EasyThe most suitable electrode material used for joining low alloy steels using Gas Metal Arc Welding (GMAW) process is
- 4ME 2024 · 2 marks · NAT · EasyAluminium is casted in a cube-shaped mold having dimensions as 20mm×20mm×20mm. Another mold of the same mold material is used to cast a sphere of aluminium having a diameter of 20mm. The pouring temperature for both cases is the same. The ratio of the solidification times of the cube-shaped mold to the spherical mold is ____ (answer in integer).
- 5ME 2024 · 2 marks · NAT · EasyA blanking operation is performed on C20 steel sheet to obtain a circular disc having a diameter of 20mm and a thickness of 2mm. An allowance of 0.04 is provided. The punch size used for the operation is ____ mm (rounded off to 2 decimal places).
- 6ME 2024 · 2 marks · NAT · ModerateIn an arc welding process, the voltage and current are 30V and 200A, respectively. The cross-sectional area of the joint is 20mm2 and the welding speed is 5mm/s. The heat required to melt the material is 20J/s. The percentage of heat lost to the surrounding during the welding process is ____ (rounded off to 2 decimal places).