Fluid Mechanics and Thermal Sciences0 / 6 done
- 1ME 2024 · 1 mark · MCQ · ModerateA plane, solid slab of thickness L, shown in the figure, has thermal conductivity k that varies with the spatial coordinate x as k=A+Bx, where A and B are positive constants (A>0,B>0). The slab walls are maintained at fixed temperatures of T(x=0)=0 and T(x=L)=T0>0. The slab has no internal heat sources. Considering one-dimensional heat transfer, which one of the following plots qualitatively depicts the steady-state temperature distribution within the slab?
- 2ME 2024 · 1 mark · MCQ · EasyConsider incompressible laminar flow over a flat plate with freestream velocity of u∞. The Nusselt number corresponding to this flow velocity is Nu1. If the freestream velocity is doubled, the Nusselt number changes to Nu2. Choose the correct option for Nu2/Nu1.
- 3ME 2024 · 1 mark · MCQ · HardConsider a hydrodynamically fully developed laminar flow through a circular pipe with the flow along the axis (i.e., z direction). In the following statements, T is the temperature of the fluid, Tw is the wall temperature and Tm is the bulk mean temperature of the fluid. Which one of the following statements is TRUE?
- 4ME 2024 · 2 marks · NAT · ModerateConsider a slab of 20mm thickness. There is a uniform heat generation of q˙=100MW/m3 inside the slab. The left and right faces of the slab are maintained at 150∘C and 110∘C, respectively. The plate has a constant thermal conductivity of 200W/(m.K). Considering a 1-D steady state heat conduction, the location of the maximum temperature from the left face will be at ____ mm (answer in integer).
- 5ME 2024 · 2 marks · NAT · ModerateA condenser is used as a heat exchanger in a large steam power plant in which steam is condensed to liquid water. The condenser is a shell and tube heat exchanger which consists of 1 shell and 20,000 tubes. Water flows through each of the tubes at a rate of 1kg/s with an inlet temperature of 30∘C. The steam in the condenser shell condenses at the rate of 430kg/s at a temperature of 50∘C. If the heat of vaporization is 2.326MJ/kg and specific heat of water is 4kJ/(kg.K), the effectiveness of the heat exchanger is ____ (rounded off to 3 decimal places).
- 6ME 2024 · 2 marks · NAT · HardConsider a hemispherical furnace of diameter D=6m with a flat base. The dome of the furnace has an emissivity of 0.7 and the flat base is a blackbody. The base and the dome are maintained at uniform temperature of 300K and 1200K, respectively. Under steady state conditions, the rate of radiation heat transfer from the dome to the base is ____ kW (rounded off to the nearest integer).