Applied Mechanics and Design0 / 3 done
- 1ME 2024 · 1 mark · MCQ · ModerateThe change in kinetic energy ΔE of an engine is 300J, and minimum and maximum shaft speeds are ωmin=220rad/s and ωmax=280rad/s, respectively. Assume that the torque-time function is purely harmonic. To achieve a coefficient of fluctuation of 0.05, the moment of inertia (in kg.m2) of the flywheel to be mounted on the engine shaft is
- 2ME 2024 · 2 marks · NAT · HardThe Levai type-A train illustrated in the figure has gears with module m=8mm/tooth. Gears 2 and 3 have 19 and 24 teeth respectively. Gear 2 is fixed and internal gear 4 rotates at 20rev/min counter-clockwise. The magnitude of angular velocity of the arm is ____ rev/min. (rounded off to 2 decimal places)
- 3ME 2024 · 2 marks · NAT · ModerateAt the instant when OP is vertical and AP is horizontal, the link OD is rotating counter clockwise at a constant rate ω=7rad/s. Pin P on link OD slides in the slot BC of link ABC which is hinged at A, and causes a clockwise rotation of the link ABC. The magnitude of angular velocity of link ABC for this instant is ____ rad/s (rounded off to 2 decimal places).