- 1Aptitude · 1 mark · MCQ · ModerateIf ‘→’ denotes increasing order of intensity, then the meaning of the words
[talk → shout → scream] is analogous to [please → ____ → pander].
- 2Aptitude · 1 mark · MCQ · EasyP and Q have been allotted a hostel room with two beds, a study table, and an almirah. P is an avid bird-watcher and wants to sit at the table and watch birds outside the window. Q does not mind that as long as his bed is close to the ceiling fan.
- 3Aptitude · 1 mark · MCQ · EasyThe decimal number system uses the characters 0,1,2,…,8,9, and the octal number system uses the characters 0,1,2,…,6,7.
- 4Aptitude · 1 mark · MCQ · EasyA shopkeeper buys shirts from a producer and sells them at 20% profit. A customer has to pay ₹3,186.00 including 18% taxes, per shirt. At what price did the shopkeeper buy each shirt from the producer?
- 5Aptitude · 1 mark · MCQ · EasyIf, for non-zero real variables x,y, and real parameter a>1,
x:y=(a+1):(a−1),
then, the ratio (x2−y2):(x2+y2) is
- 6Aptitude · 2 marks · MCQ · EasyIn the given text, the blanks are numbered (i)–(iv). Select the best match for all the blanks.
- 7Aptitude · 2 marks · MCQ · ModerateIn the following figure,
CD=5cm,BE=10cm,AE=12cm,
∠DAB=∠DCB, and ∠DAE=∠DBC=90∘
Points AFCD create a rhombus.
- 8Aptitude · 2 marks · MCQ · ModerateThe chart below shows the data of the number of cars bought by Millennials and Gen X people in a country from the year 2010 to 2020 as well as the yearly fuel consumption of the country (in Million liters).
- 9Aptitude · 2 marks · MCQ · ModerateThe assembly shown below has three teethed circular objects (Pinions) and two teethed flat objects (Racks), which are perfectly mating with each other. Pinions can only rotate clockwise or anti-clockwise staying at its own center. Racks can translate towards the left (←) or the right (→) direction.
- 10Aptitude · 2 marks · MCQ · ModerateA surveyor has to measure the horizontal distance from her position to a distant reference point C. Using her position as the center, a 200m horizontal line segment is drawn with the two endpoints A and B. Points A, B, and C are not collinear. Each of the angles ∠CAB and ∠CBA are measured as 87.8∘. The distance (in m) of the reference point C from her position is nearest to
- 111 mark · MCQ · EasyWhich one of the following matrices has an inverse?
- 121 mark · MCQ · EasyThe number of junctions in the circuit is
- 131 mark · MCQ · EasyAll the elements in the circuit are ideal. The power delivered by the 10V source in watts is
- 141 mark · MCQ · ModerateThe circuit shown in the figure with the switch S open, is in steady state. After the switch S is closed, the time constant of the circuit in seconds is
- 151 mark · MCQ · ModerateSuppose signal y(t) is obtained by the time-reversal of signal x(t), i.e., y(t)=x(−t), −∞<t<∞. Which one of the following options is always true for the convolution of x(t) and y(t)?
- 161 mark · MCQ · EasyIf u(t) is the unit step function, then the region of convergence (ROC) of the Laplace transform of the signal
x(t)=et2[u(t−1)−u(t−10)]
is
- 171 mark · MCQ · EasyA three phase, 50Hz, 6 pole induction motor runs at 960rpm. The stator copper loss, core loss, and the rotational loss of the motor can be neglected. The percentage efficiency of the motor is
- 181 mark · MCQ · EasyWhich one of the following options represents possible voltage polarities in a single phase two winding transformer? Here, Vp is the applied primary voltage, Ep is the induced primary voltage, Vs is the open circuit secondary voltage, and Es is the induced secondary voltage.
- 191 mark · MCQ · HardThe figure shows the single line diagram of a 4-bus power network. Branches b1, b2, b3, and b4 have impedances 4z, z, 2z, and 4z per-unit (pu), respectively, where z=r+jx, with r>0 and x>0. The current drawn from each load bus (marked as arrows) is equal to Ipu, where I=0. If the network is to operate with minimum loss, the branch that should be opened is
- 201 mark · MCQ · ModerateFor the block-diagram shown in the figure, the transfer function R(s)C(s) is
- 211 mark · MCQ · ModerateConsider the standard second-order system of the form s2+2ζωns+ωn2ωn2 with the poles p and p∗ having negative real parts. The pole locations are also shown in the figure. Now consider two such second-order systems as defined below:
- 221 mark · MCQ · ModerateConsider the cascaded system as shown in the figure. Neglecting the faster component of the transient response, which one of the following options is a first-order pole-only approximation such that the steady-state values of the unit step responses of the original and the approximated systems are same?
- 231 mark · MCQ · EasyThe table lists two instrument transformers and their features:
- 241 mark · MCQ · ModerateSimplified form of the Boolean function
- 251 mark · MCQ · ModerateIn the circuit, the present value of Z is 1. Neglecting the delay in the combinatorial circuit, the values of S and Z, respectively, after the application of the clock will be
- 261 mark · MCQ · ModerateTo obtain the Boolean function F(X,Y)=XYˉ+Xˉ, the inputs PQRS in the figure should be
- 271 mark · MCQ · EasyIf the following switching devices have similar power ratings, which one of them is the fastest?
- 281 mark · MCQ · ModerateA single-phase triac based AC voltage controller feeds a series RL load. The input AC supply is 230V, 50Hz. The values of R and L are 10Ω and 18.37mH, respectively. The minimum triggering angle of the triac to obtain controllable output voltage is
- 291 mark · MSQ · ModerateLet X be a discrete random variable that is uniformly distributed over the set {−10,−9,⋯,0,⋯,9,10}. Which of the following random variables is/are uniformly distributed?
- 301 mark · MSQ · EasyWhich of the following complex functions is/are analytic on the complex plane?
- 311 mark · NAT · EasyConsider the complex function f(z)=cosz+ez2. The coefficient of z5 in the Taylor series expansion of f(z) about the origin is ____ (rounded off to 1 decimal place).
- 321 mark · NAT · ModerateThe sum of the eigenvalues of the matrix A=[1324]2 is ____ (rounded off to the nearest integer).
- 331 mark · NAT · EasyLet X(ω) be the Fourier transform of the signal
- 341 mark · NAT · ModerateThe incremental cost curves of two generators (Gen A and Gen B) in a plant supplying a common load are shown in the figure. If the incremental cost of supplying the common load is Rs. 7400 per MWh, then the common load in MW is ____ (rounded off to the nearest integer).
- 351 mark · NAT · ModerateA forced commutated thyristorized step-down chopper is shown in the figure. Neglect the ON-state drop across the power devices. Assume that the capacitor is initially charged to 50V with the polarity shown in the figure. The load current (IL) can be assumed to be constant at 10A. Initially, ThM is ON and ThA is OFF. The turn-off time available to ThM in microseconds, when ThA is triggered, is ____ (rounded off to the nearest integer).
- 362 marks · MCQ · ModerateConsider a vector uˉ=2x^+y^+2z^, where x^,y^,z^ represent unit vectors along the coordinate axes x,y,z respectively. The directional derivative of the function f(x,y,z)=2ln(xy)+ln(yz)+3ln(xz) at the point (x,y,z)=(1,1,1) in the direction of uˉ is
- 372 marks · MCQ · EasyThe input x(t) and the output y(t) of a system are related as
- 382 marks · MCQ · ModerateConsider the discrete-time systems T1 and T2 defined as follows:
- 392 marks · MCQ · HardIf the Z-transform of a finite-duration discrete-time signal x[n] is X(z), then the Z-transform of the signal y[n]=x[2n] is
- 402 marks · MCQ · HardA 3-phase, 11kV, 10MVA synchronous generator is connected to an inductive load of power factor (3/2) via a lossless line with a per-phase inductive reactance of 5Ω. The per-phase synchronous reactance of the generator is 30Ω with negligible armature resistance. If the generator is producing the rated current at the rated voltage, then the power factor at the terminal of the generator is
- 412 marks · MCQ · ModerateFor the three-bus lossless power network shown in the figure, the voltage magnitudes at all the buses are equal to 1 per unit (pu), and the differences of the voltage phase angles are very small. The line reactances are marked in the figure, where α, β, γ, and x are strictly positive. The bus injections P1 and P2 are in pu. If P1=mP2, where m>0, and the real power flow from bus 1 to bus 2 is 0pu, then which one of the following options is correct?
- 422 marks · MCQ · ModerateA BJT biasing circuit is shown in the figure, where VBE=0.7V and β=100. The Quiescent Point values of VCE and IC are respectively
- 432 marks · MSQ · ModerateLet f(t) be a real-valued function whose second derivative is positive for −∞<t<∞. Which of the following statements is/are always true?
- 442 marks · MSQ · ModerateConsider the function f(t)=(max(0,t))2 for −∞<t<∞, where max(a,b) denotes the maximum of a and b. Which of the following statements is/are true?
- 452 marks · MSQ · EasyWhich of the following differential equations is/are nonlinear?
- 462 marks · MSQ · ModerateFor a two-phase network, the phase voltages Vp and Vq are to be expressed in terms of sequence voltages Vα and Vβ as [VpVq]=S[VαVβ]. The possible option(s) for matrix S is/are
- 472 marks · MSQ · EasyWhich of the following options is/are correct for the Automatic Generation Control (AGC) and Automatic Voltage Regulator (AVR) installed with synchronous generators?
- 482 marks · NAT · ModerateTwo passive two-port networks P and Q are connected as shown in the figure. The impedance matrix of network P is ZP=[40Ω80Ω60Ω100Ω]. The admittance matrix of network Q is YQ=[5S−2.5S−2.5S1S]. Let the ABCD matrix of the two-port network R in the figure be [αγβδ]. The value of β in Ω is ____ (rounded off to 2 decimal places).
- 492 marks · NAT · HardFor the circuit shown in the figure, the source frequency is 5000rad/sec. The mutual inductance between the magnetically coupled inductors is 5mH with their self inductances being 125mH and 1mH. The Thevenin's impedance, Zth, between the terminals P and Q in Ω is ____ (rounded off to 2 decimal places).
- 502 marks · NAT · ModerateIn the circuit shown, Z1=50∠−90∘Ω and Z2=200∠−30∘Ω. It is supplied by a three phase 400V source with the phase sequence being R-Y-B. Assume the watt meters W1 and W2 to be ideal. The magnitude of the difference between the readings of W1 and W2 in watts is ____ (rounded off to 2 decimal places).
- 512 marks · NAT · ModerateIn the (x,y,z) coordinate system, three point-charges Q, Q, and αQ are located in free space at (−1,0,0), (1,0,0), and (0,−1,0), respectively. The value of α for the electric field to be zero at (0,0.5,0) is ____ (rounded off to 1 decimal place).
- 522 marks · NAT · ModerateThe given equation represents a magnetic field strength Hˉ(r,θ,ϕ) in the spherical coordinate system, in free space. Here, r^ and θ^ represent the unit vectors along r and θ, respectively. The value of P in the equation should be ____ (rounded off to the nearest integer).
- 532 marks · NAT · EasyIf the energy of a continuous-time signal x(t) is E and the energy of the signal 2x(2t−1) is cE, then c is ____ (rounded off to 1 decimal place).
- 542 marks · NAT · ModerateA 3-phase star connected slip ring induction motor has the following parameters referred to the stator:
- 552 marks · NAT · HardA 5kW, 220V DC shunt motor has 0.5Ω armature resistance including brushes. The motor draws a no-load current of 3A. The field current is constant at 1A. Assuming that the core and rotational losses are constant and independent of the load, the current (in amperes) drawn by the motor while delivering the rated load, for the best possible efficiency, is ____ (rounded off to 2 decimal places).
- 562 marks · NAT · ModerateThe single line diagram of a lossless system is shown in the figure. The system is operating in steady-state at a stable equilibrium point with the power output of the generator being Pmaxsinδ, where δ is the load angle and the mechanical power input is 0.5Pmax. A fault occurs on line 2 such that the power output of the generator is less than 0.5Pmax during the fault. After the fault is cleared by opening line 2, the power output of the generator is {Pmax/2}sinδ. If the critical fault clearing angle is π/2 radians, the accelerating area on the power angle curve is ____ times Pmax (rounded off to 2 decimal places).
- 572 marks · NAT · ModerateConsider the closed-loop system shown in the figure with
G(s)=(s2+2s+5)K(s2−2s+2).
The root locus for the closed-loop system is to be drawn for 0≤K<∞. The angle of departure (between 0∘ and 360∘) of the root locus branch drawn from the pole (−1+j2), in degrees, is ____ (rounded off to the nearest integer).
- 582 marks · NAT · ModerateConsider the stable closed-loop system shown in the figure. The asymptotic Bode magnitude plot of G(s) has a constant slope of −20dB/decade at least till 100rad/sec with the gain crossover frequency being 10rad/sec. The asymptotic Bode phase plot remains constant at −90∘ at least till ω=10rad/sec. The steady-state error of the closed-loop system for a unit ramp input is ____ (rounded off to 2 decimal places).
- 592 marks · NAT · ModerateConsider the stable closed-loop system shown in the figure. The magnitude and phase values of the frequency response of G(s) are given in the table. The value of the gain KI (>0) for a 50∘ phase margin is ____ (rounded off to 2 decimal places).
- 602 marks · NAT · ModerateIn the given circuit, the diodes are ideal. The current I through the diode D1 in milliamperes is ____ (rounded off to two decimal places).
- 612 marks · NAT · ModerateA difference amplifier is shown in the figure. Assume the op-amp to be ideal. The CMRR (in dB) of the difference amplifier is ____ (rounded off to 2 decimal places).
- 622 marks · NAT · HardA single-phase half-controlled bridge converter supplies an inductive load with ripple free load current. The triggering angle of the converter is 60∘. The ratio of the rms value of the fundamental component of the input current to the rms value of the total input current of the bridge is ____ (rounded off to 3 decimal places).
- 632 marks · NAT · EasyA single-phase full bridge voltage source inverter (VSI) feeds a purely inductive load. The inverter output voltage is a square wave in 180∘ conduction mode. The fundamental frequency of the output voltage is 50Hz. If the DC input voltage of the inverter is 100V and the value of the load inductance is 20mH, the peak-to-peak load current in amperes is ____ (rounded off to the nearest integer).
- 642 marks · NAT · ModerateIn the DC-DC converter shown in the figure, the current through the inductor is continuous. The switching frequency is 500Hz. The voltage (Vo) across the load is assumed to be constant and ripple free. The peak inductor current in amperes is ____ (rounded off to the nearest integer).
- 652 marks · NAT · ModerateA single-phase full-controlled thyristor converter bridge is used for regenerative braking of a separately excited DC motor with the following specifications: