- 1Aptitude · 1 mark · MCQ · EasyRafi told Mary, "I am thinking of watching a film this weekend."
- 2Aptitude · 1 mark · MCQ · EasyPermit : _____ :: Enforce : Relax
- 3Aptitude · 1 mark · MCQ · EasyGiven a fair six-faced dice where the faces are labelled '1', '2', '3', '4', '5', and '6', what is the probability of getting a '1' on the first roll of the dice and a '4' on the second roll?
- 4Aptitude · 1 mark · MCQ · ModerateA recent survey shows that 65% of tobacco users were advised to stop consuming tobacco. The survey also shows that 3 out of 10 tobacco users attempted to stop using tobacco.
- 5Aptitude · 1 mark · MCQ · ModerateHow many triangles are present in the given figure?
- 6Aptitude · 2 marks · MCQ · ModerateStudents of all the departments of a college who have successfully completed the registration process are eligible to vote in the upcoming college elections. However, by the time the due date for registration was over, it was found that suprisingly none of the students from the Department of Human Sciences had completed the registration process.
- 7Aptitude · 2 marks · MCQ · EasyWhich one of the following options represents the given graph?

- 8Aptitude · 2 marks · MCQ · EasyWhich one of the options does NOT describe the passage below or follow from it?
- 9Aptitude · 2 marks · MCQ · EasyThe digit in the unit's place of the product 3999×71000 is _______.
- 10Aptitude · 2 marks · MCQ · ModerateA square with sides of length 6cm is given. The boundary of the shaded region is defined by two semi-circles whose diameters are the sides of the square, as shown.
- 111 mark · MCQ · EasyFor a given vector w=[1 2 3]T, the vector normal to the plane defined by wTx=1 is
- 121 mark · MCQ · ModerateFor the block diagram shown in the figure, the transfer function R(s)Y(s) is

- 131 mark · MCQ · EasyIn the Nyquist plot of the open-loop transfer function
- 141 mark · MCQ · ModerateConsider a unity-gain negative feedback system consisting of the plant G(s) (given below) and a proportional-integral controller. Let the proportional gain and integral gain be 3 and 1, respectively. For a unit step reference input, the final values of the controller output and the plant output, respectively, are
- 151 mark · MCQ · EasyThe following columns present various modes of induction machine operation and the ranges of slip
- 161 mark · MCQ · ModerateA 10-pole, 50Hz, 240V, single phase induction motor runs at 540RPM while driving rated load. The frequency of induced rotor currents due to backward field is
- 171 mark · MCQ · EasyA continuous-time system that is initially at rest is described by
dtdy(t)+3y(t)=2x(t),
where x(t) is the input voltage and y(t) is the output voltage. The impulse response of the system is
- 181 mark · MCQ · ModerateThe Fourier transform X(ω) of the signal x(t) is given by
- 191 mark · MCQ · ModerateThe Z-transform of a discrete signal x[n] is
- 201 mark · MCQ · HardFor the three-bus power system shown in the figure, the trip signals to the circuit breakers B1 to B9 are provided by overcurrent relays R1 to R9, respectively, some of which have directional properties also. The necessary condition for the system to be protected for short circuit fault at any part of the system between bus 1 and the R-L loads with isolation of minimum portion of the network using minimum number of directional relays is
- 211 mark · MCQ · HardThe expressions of fuel cost of two thermal generating units as a function of the respective power generation PG1 and PG2 are given as
F1(PG1)=0.1aPG12+40PG1+120Rs/hour0MW≤PG1≤350MW
F2(PG2)=0.2PG22+30PG2+100Rs/hour0MW≤PG2≤300MW
where a is a constant. For a given value of a, optimal dispatch requires the total load of 290MW to be shared as PG1=175MW and PG2=115MW. With the load remaining unchanged, the value of a is increased by 10% and optimal dispatch is carried out. The changes in PG1 and the total cost of generation, F(=F1+F2) in Rs/hour will be as follows
- 221 mark · MCQ · ModerateThe four stator conductors (A, A′, B and B′) of a rotating machine are carrying DC currents of the same value, the directions of which are shown in the figure (i). The rotor coils a−a′ and b−b′ are formed by connecting the back ends of conductors 'a' and 'a′' and 'b' and 'b′', respectively, as shown in figure (ii). The e.m.f. induced in coil a−a′ and coil b−b′ are denoted by Ea−a′ and Eb−b′, respectively. If the rotor is rotated at uniform angular speed ωrad/s in the clockwise direction then which of the following correctly describes the Ea−a′ and Eb−b′?
- 231 mark · MCQ · ModerateThe chopper circuit shown in figure (i) feeds power to a 5A DC constant current source. The switching frequency of the chopper is 100kHz. All the components can be assumed to be ideal. The gate signals of switches S1 and S2 are shown in figure (ii). Average voltage across the 5A current source is

- 241 mark · MCQ · EasyIn the figure, the vectors u and v are related as: Au=v by a transformation matrix A. The correct choice of A is
- 251 mark · MCQ · ModerateOne million random numbers are generated from a statistically stationary process with a Gaussian distribution with mean zero and standard deviation σo.
- 261 mark · MSQ · ModerateA semiconductor switch needs to block voltage V of only one polarity (V>0) during OFF state as shown in figure (i) and carry current in both directions during ON state as shown in figure (ii). Which of the following switch combination(s) will realize the same?
- 271 mark · MSQ · ModerateWhich of the following statement(s) is/are true?
- 281 mark · MSQ · HardThe bus admittance (Ybus) matrix of a 3-bus power system is given below.
- 291 mark · NAT · HardThe value of parameters of the circuit shown in the figure are
R1=2Ω,R2=2Ω,R3=3Ω,L=10mH,C=100μF
For time t<0, the circuit is at steady state with the switch 'K' in closed condition. If the switch is opened at t=0, the value of the voltage across the inductor (VL) at t=0+ in Volts is _____ (Round off to 1 decimal place). - 301 mark · NAT · ModerateA separately excited DC motor rated 400V, 15A, 1500RPM drives a constant torque load at rated speed operating from 400V DC supply drawing rated current. The armature resistance is 1.2Ω. If the supply voltage drops by 10% with field current unaltered then the resultant speed of the motor in RPM is ________ (Round off to the nearest integer).
- 311 mark · NAT · ModerateFor the signals x(t) and y(t) shown in the figure, z(t)=x(t)∗y(t) is maximum at t=T1. Then T1 in seconds is ____________ (Round off to the nearest integer).
- 321 mark · NAT · ModerateFor the circuit shown in the figure, V1=8V,DC and I1=8A,DC. The voltage Vab in Volts is _____ (Round off to 1 decimal place).
- 331 mark · NAT · HardA 50Hz, 275kV line of length 400km has the following parameters:
- 341 mark · NAT · ModerateIn the following differential equation, the numerically obtained value of y(t), at t=1, is _____ (Round off to 2 decimal places).
- 351 mark · NAT · EasyThree points in the x−y plane are (−1,0.8), (0,2.2) and (1,2.8). The value of the slope of the best fit straight line in the least square sense is ____ (Round off to 2 decimal places).
- 362 marks · MCQ · ModerateThe magnitude and phase plots of an LTI system are shown in the figure. The transfer function of the system is
- 372 marks · MCQ · ModerateConsider the OP AMP based circuit shown in the figure. Ignore the conduction drops of diodes D1 and D2. All the components are ideal and the breakdown voltage of the Zener is 5V. Which of the following statements is true?
- 382 marks · MCQ · ModerateConsider a lead compensator of the form
K(s)=1+βas1+as,β>1,a>0
The frequency at which this compensator produces maximum phase lead is 4rad/s. At this frequency, the gain amplification provided by the controller, assuming asymptotic Bode-magnitude plot of K(s), is 6dB. The values of a,β, respectively, are
- 392 marks · MCQ · ModerateA 3-phase, star-connected, balanced load is supplied from a 3-phase, 400V (rms), balanced voltage source with phase sequence R-Y-B, as shown in the figure. If the wattmeter reading is −400W and the line current is IR=2A (rms), then the power factor of the load per phase is
- 402 marks · MCQ · ModerateAn 8 bit ADC converts analog voltage in the range of 0 to +5V to the corresponding digital code as per the conversion characteristics shown in figure. For Vin=1.9922V, which of the following digital output, given in hex, is true ?
- 412 marks · MCQ · ModerateThe three-bus power system shown in the figure has one alternator connected to bus 2 which supplies 200MW and 40MVAr power. Bus 3 is infinite bus having a voltage of magnitude ∣V3∣=1.0p.u. and angle of −15∘. A variable current source, ∣I∣∠ϕ is connected at bus 1 and controlled such that the magnitude of the bus 1 voltage is maintained at 1.05p.u. and the phase angle of the source current, ϕ=θ1±2π, where θ1 is the phase angle of the bus 1 voltage. The three buses can be categorized for load flow analysis as
- 422 marks · MSQ · HardConsider the following equation in a 2-D real-space.
- 432 marks · MSQ · HardIn the figure, the electric field E and the magnetic field B point to x and z directions, respectively, and have constant magnitudes. A positive charge q is released from rest at the origin. Which of the following statement(s) is/are true.
- 442 marks · MSQ · ModerateAll the elements in the circuit shown in the following figure are ideal. Which of the following statements is/are true?
- 452 marks · NAT · EasyThe expected number of trials for first occurrence of a "head" in a biased coin is known to be 4. The probability of first occurrence of a "head" in the second trial is ________ (Round off to 3 decimal places).
- 462 marks · NAT · ModerateConsider the state-space description of an LTI system with matrices
A=[0−11−2],B=[01],C=[3−2],D=1
For the input, sin(ωt), ω>0, the value of ω for which the steady-state output of the system will be zero, is ________ (Round off to the nearest integer).
- 472 marks · NAT · EasyA three-phase synchronous motor with synchronous impedance of 0.1+j0.3 per unit per phase has a static stability limit of 2.5 per unit. The corresponding excitation voltage in per unit is ______ (Round off to 2 decimal places).
- 482 marks · NAT · ModerateA three phase 415V, 50Hz, 6-pole, 960RPM, 4HP squirrel cage induction motor drives a constant torque load at rated speed operating from rated supply and delivering rated output. If the supply voltage and frequency are reduced by 20%, the resultant speed of the motor in RPM (neglecting the stator leakage impedance and rotational losses) is ____. (Round off to the nearest integer).
- 492 marks · NAT · ModerateThe period of the discrete-time signal x[n] described by the equation below is N=____________________ (Round off to the nearest integer).
- 502 marks · NAT · HardThe discrete-time Fourier transform of a signal x[n] is X(Ω)=(1+cosΩ)e−jΩ. Consider that xp[n] is a periodic signal of period N=5 such that
xp[n]=x[n], for n=0,1,2
=0, for n=3,4
Note that xp[n]=∑k=0N−1akejN2πkn. The magnitude of the Fourier series coefficient a3 is ____________ (Round off to 3 decimal places).
- 512 marks · NAT · HardFor the circuit shown, if i=sin1000t, the instantaneous value of the Thevenin's equivalent voltage (in Volts) across the terminals a-b at time t=5ms is _____ (Round off to 2 decimal places).
- 522 marks · NAT · ModerateThe admittance parameters of the passive resistive two-port network shown in the figure are
y11=5S,y22=1S,y12=y21=−2.5S
The power delivered to the load resistor RL in Watt is _____ (Round off to 2 decimal places).
- 532 marks · NAT · HardWhen the winding c−d of the single-phase, 50Hz, two winding transformer is supplied from an AC current source of frequency 50Hz, the rated voltage of 200V (rms), 50Hz is obtained at the open-circuited terminals a−b. The cross sectional area of the core is 5000mm2 and the average core length traversed by the mutual flux is 500mm. The maximum allowable flux density in the core is Bmax=1Wb/m2 and the relative permeability of the core material is 5000. The leakage impedance of the winding a−b and winding c−d at 50Hz are (5+j100π×0.16)Ω and (11.25+j100π×0.36)Ω, respectively. Considering the magnetizing characteristics to be linear and neglecting core loss, the self-inductance of the winding a−b in millihenry is _____ (Round off to 1 decimal place).
- 542 marks · NAT · HardThe circuit shown in the figure is initially in the steady state with the switch K in open condition and Kˉ in closed condition. The switch K is closed and Kˉ is opened simultaneously at the instant t=t1, where t1>0. The minimum value of t1 in milliseconds, such that there is no transient in the voltage across the 100μF capacitor, is ___________ (Round off to 2 decimal places).
- 552 marks · NAT · HardThe circuit shown in the figure has reached steady state with thyristor 'T' in OFF condition. Assume that the latching and holding currents of the thyristor are zero. The thyristor is turned ON at t=0sec. The duration in microseconds for which the thyristor would conduct, before it turns off, is ____ (Round off to 2 decimal places).
- 562 marks · NAT · ModerateNeglecting the delays due to the logic gates in the circuit shown in figure, the decimal equivalent of the binary sequence [ABCD] of initial logic states, which will not change with clock, is ________.
- 572 marks · NAT · ModerateIn a given 8-bit general purpose micro-controller there are following flags.
- 582 marks · NAT · HardThe single phase rectifier consisting of three thyristors T1, T2, T3 and a diode D1 feed power to a 10A constant current load. T1 and T3 are fired at α=60∘ and T2 is fired at α=240∘. The reference for α is the positive zero crossing of Vin. The average voltage VO across the load in volts is ____ (Round off to 2 decimal places).
- 592 marks · NAT · HardThe Zener diode in circuit has a breakdown voltage of 5V. The current gain β of the transistor in the active region in 99. Ignore base-emitter voltage drop VBE. The current through the 20Ω resistance in milliamperes is ________ (Round off to 2 decimal places).
- 602 marks · NAT · HardThe two-bus power system shown in figure (i) has one alternator supplying a synchronous motor load through a Y-Δ transformer. The positive, negative and zero-sequence diagrams of the system are shown in figures (ii), (iii) and (iv), respectively. All reactances in the sequence diagrams are in p.u. For a bolted line-to-line fault (fault impedance = zero) between phases 'b' and 'c' at bus 1, neglecting all pre-fault currents, the magnitude of the fault current (from phase 'b' to 'c') in p.u. is ________ (Round off to 2 decimal places).
- 612 marks · NAT · EasyAn infinite surface of linear current density K=5a^xA/m exists on the x-y plane, as shown in the figure.
- 622 marks · NAT · ModerateThe closed curve shown in the figure is described by
- 632 marks · NAT · ModerateA signal x(t)=2cos(180πt)cos(60πt) is sampled at 200Hz and then passed through an ideal low pass filter having cut-off frequency of 100Hz.
- 642 marks · NAT · ModerateA balanced delta connected load consisting of the series connection of one resistor (R=15Ω) and a capacitor (C=212.21μF) in each phase is connected to three-phase, 50Hz, 415V supply terminals through a line having an inductance of L=31.83mH per phase, as shown in the figure. Considering the change in the supply terminal voltage with loading to be negligible, the magnitude of the voltage across the terminals VAB in Volts is ________ (Round off to the nearest integer).
- 652 marks · NAT · ModerateA quadratic function of two variables is given as