Water Resources Engineering0 / 6 done
- 1CE 2024 Set 1 · 1 mark · MCQ · ModerateThe number of degrees of freedom for a natural open channel flow with a mobile bed is
- 2CE 2024 Set 1 · 2 marks · NAT · HardA standard round bottom triangular canal section as shown in the figure has a bed slope of 1 in 200. Consider the Chezy's coefficient as 150m1/2/s.
- 3CE 2024 Set 1 · 2 marks · NAT · ModerateA spillway has unit discharge of 7.5m3/s/m. The flow depth at the downstream horizontal apron is 0.5m. The tail water depth (in meters) required to form a hydraulic jump is ____ (rounded off to 2 decimal places).
- 4CE 2024 Set 2 · 1 mark · NAT · EasyA 2m wide rectangular channel is carrying a discharge of 30m3/s at a bed slope of 1 in 300. Assuming the energy correction factor as 1.1 and acceleration due to gravity as 10m/s2, the critical depth of flow (in meters) is ____ (rounded off to 2 decimal places).
- 5CE 2024 Set 2 · 2 marks · MCQ · ModerateA round-bottom triangular lined canal is to be laid at a slope of 1 in 1500, to carry a discharge of 25m3/s. The side slopes of the canal cross-section are to be kept at 1.25H:1V. If Manning’s roughness coefficient is 0.013, the flow depth (in meters) will be in the range of
- 6CE 2024 Set 2 · 2 marks · NAT · HardA rectangular channel is 4.0m wide and carries a discharge of 2.0m3/s with a depth of 0.4m. The channel transitions to a maximum width contraction at a downstream location, without influencing the upstream flow conditions. The width (in meters) at the maximum contraction is ____ (rounded off to 2 decimal places).