Structural Engineering0 / 4 done
- 1CE 2024 Set 1 · 2 marks · MCQ · HardThe beam shown in the figure is subjected to a uniformly distributed downward load of intensity q between supports A and B.
- 2CE 2024 Set 1 · 2 marks · NAT · HardThe plane truss shown in the figure has 13 joints and 22 members. The truss is made of a homogeneous, prismatic, linearly elastic material. All members have identical axial rigidity. A to M indicate the joints of the truss. The truss has pin supports at joints A and L and roller support at joint K. The truss is subjected to a 10kN vertically downward force at joint H and a 10kN horizontal force in the rightward direction at joint B as shown.
- 3CE 2024 Set 2 · 2 marks · NAT · ModerateFor the 6m long horizontal cantilever beam PQR shown in the figure, Q is the mid-point. Segment PQ of the beam has flexural rigidity EI=2×105kN⋅m2 whereas the segment QR has infinite flexural rigidity. Segment QR is subjected to uniformly distributed, vertically downward load of 5kN/m.
- 4CE 2024 Set 2 · 2 marks · NAT · EasyThe horizontal beam PQRS shown in the figure has a fixed support at point P, an internal hinge at point Q, and a pin support at point R. A concentrated vertically downward load (V) of 10kN can act at any point over the entire length of the beam.