11 questions0 / 11 done
- 1CE 2024 Set 1 · 1 mark · MCQ · EasyThe following table gives various components of Municipal Solid Waste (MSW) and a list of treatment/separation techniques.
- 2CE 2024 Set 1 · 1 mark · MSQ · EasyThe primary air pollutant(s) is/are
- 3CE 2024 Set 1 · 2 marks · MCQ · ModerateFor assessing the compliance with the emissions standards of incineration plants, a correction needs to be applied to the measured concentrations of air pollutants. The emission standard (based on 11% Oxygen) for HCl is 50mg/Nm3 and the measured concentrations of HCl and Oxygen in flue gas are 42mg/Nm3 and 13%, respectively.
- 4CE 2024 Set 1 · 2 marks · NAT · EasyActivated carbon is used to remove a pollutant from wastewater in a mixed batch reactor, which follows first-order reaction kinetics.
- 5CE 2024 Set 1 · 2 marks · NAT · EasyA water treatment plant treats 25MLD water with a natural alkalinity of 4.0mg/L (as CaCO3). It is estimated that, during coagulation of this water, 450kg/day of calcium bicarbonate (Ca(HCO3)2) is required based on the alum dosage.
- 6CE 2024 Set 2 · 1 mark · MCQ · EasyWhat is the CORRECT match between the air pollutants and treatment techniques given in the table?
- 7CE 2024 Set 2 · 1 mark · MCQ · ModerateWhich one of the following products is NOT obtained in anaerobic decomposition of glucose?
- 8CE 2024 Set 2 · 2 marks · MCQ · ModerateA hypothetical multimedia filter, consisting of anthracite particles (specific gravity: 1.50), silica sand (specific gravity: 2.60), and ilmenite sand (specific gravity: 4.20), is to be designed for treating water/wastewater. After backwashing, the particles should settle forming three layers: coarse anthracite particles at the top of the bed, silica sand in the middle, and small ilmenite sand particles at the bottom of the bed.
- 9CE 2024 Set 2 · 2 marks · NAT · ModerateA 2m×1.5m tank of 6m height is provided with a 100mm diameter orifice at the center of its base. The orifice is plugged and the tank is filled up to 5m height. Consider the average value of discharge coefficient as 0.6 and acceleration due to gravity (g) as 10m/s2. After unplugging the orifice, the time (in seconds) taken for the water level to drop from 5m to 3.5m under free discharge condition is ____ (rounded off to 2 decimal places).
- 10CE 2024 Set 2 · 2 marks · NAT · ModerateA circular settling tank is to be designed for primary treatment of sewage at a flow rate of 10 million liters/day. Assume a detention period of 2.0hours and surface loading rate of 40000liters/m2/day. The height (in meters) of the water column in the tank is ____ (rounded off to 2 decimal places).
- 11CE 2024 Set 2 · 2 marks · NAT · EasyAn organic waste is represented as C240O200H180N5S.