- 1Aptitude · 1 mark · MCQ · EasyIf ‘→’ denotes increasing order of intensity, then the meaning of the words
[drizzle → rain → downpour] is analogous to [____ → quarrel → feud].
Which one of the given options is appropriate to fill the blank?
- 2Aptitude · 1 mark · MCQ · ModerateStatements:
- 3Aptitude · 1 mark · MCQ · ModerateA student was supposed to multiply a positive real number p with another positive real number q. Instead, the student divided p by q. If the percentage error in the student’s answer is 80%, the value of q is
- 4Aptitude · 1 mark · MCQ · EasyIf the sum of the first 20 consecutive positive odd numbers is divided by 202, the result is
- 5Aptitude · 1 mark · MCQ · ModerateThe ratio of the number of girls to boys in class VIII is the same as the ratio of the number of boys to girls in class IX. The total number of students (boys and girls) in classes VIII and IX is 450 and 360, respectively. If the number of girls in classes VIII and IX is the same, then the number of girls in each class is
- 6Aptitude · 2 marks · MCQ · ModerateIn the given text, the blanks are numbered (i)–(iv). Select the best match for all the blanks.
- 7Aptitude · 2 marks · MCQ · ModerateSeven identical cylindrical chalk-sticks are fitted tightly in a cylindrical container. The figure below shows the arrangement of the chalk-sticks inside the cylinder.
- 8Aptitude · 2 marks · MCQ · EasyThe plot below shows the relationship between the mortality risk of cardiovascular disease and the number of steps a person walks per day. Based on the data, which one of the following options is true?
- 9Aptitude · 2 marks · MCQ · ModerateFive cubes of identical size and another smaller cube are assembled as shown in Figure A. If viewed from direction X, the planar image of the assembly appears as Figure B.
- 10Aptitude · 2 marks · MCQ · EasyVisualize a cube that is held with one of the four body diagonals aligned to the vertical axis. Rotate the cube about this axis such that its view remains unchanged. The magnitude of the minimum angle of rotation is
- 111 mark · MCQ · ModerateA partial differential equation
- 121 mark · MCQ · EasyThe statements P and Q are related to matrices A and B, which are conformable for both addition and multiplication.
- 131 mark · MCQ · EasyThe second derivative of a function f is computed using the fourth-order Central Divided Difference method with a step length h.
- 141 mark · MCQ · EasyThe function f(x)=x3−27x+4 , 1≤x≤6 has
- 151 mark · MCQ · ModerateConsider two Ordinary Differential Equations (ODEs):
- 161 mark · MCQ · ModerateA 3m long, horizontal, rigid, uniform beam PQ has negligible mass. The beam is subjected to a 3kN concentrated vertically downward force at 1m from P, as shown in the figure. The beam is resting on vertical linear springs at the ends P and Q. For the spring at the end P, the spring constant KP=100kN/m.
- 171 mark · MCQ · EasyConsider the statements P and Q.
- 181 mark · MCQ · HardFor a thin-walled section shown in the figure, points P, Q , and R are located on the major bending axis X−X of the section. Point Q is located on the web whereas point S is located at the intersection of the web and the top flange of the section.
- 191 mark · MCQ · EasyConsider the following data for a project of 300 days duration.
- 201 mark · MCQ · ModerateA simply supported, uniformly loaded, two-way slab panel is torsionally unrestrained. The effective span lengths along the short span (x) and long span (y) directions of the panel are lx and ly, respectively. The design moments for the reinforcements along the x and y directions are Mux and Muy, respectively. By using Rankine-Grashoff method, the ratio Mux/Muy is proportional to
- 211 mark · MCQ · EasyThe structural design method that DOES NOT take into account the safety factors on the design loads is
- 221 mark · MCQ · ModerateThe contact pressure distribution shown in the figure belongs to a
- 231 mark · MCQ · ModerateWhich one of the following saturated fine-grained soils can attain a negative Skempton's pore pressure coefficient (A)?
- 241 mark · MCQ · ModerateThe following figure shows a plot between shear stress and velocity gradient for materials/fluids P, Q, R, S, and T.
- 251 mark · MCQ · EasyWhat is the CORRECT match between the air pollutants and treatment techniques given in the table?
- 261 mark · MCQ · ModerateWhich one of the following products is NOT obtained in anaerobic decomposition of glucose?
- 271 mark · MCQ · ModerateThe longitudinal sections of a runway have gradients as shown in the table.
- 281 mark · MCQ · EasyIn general, the outer edge is raised above the inner edge in horizontal curves for
- 291 mark · MCQ · ModerateVarious stresses in jointed plain concrete pavement with slab size of 3.5m×4.5m are denoted as follows:
- 301 mark · MCQ · EasyFor a reconnaissance survey, it is necessary to obtain vertical aerial photographs of a terrain at an average scale of 1:13000 using a camera. If the permissible flying height is assumed as 3000m above a datum and the average terrain elevation is 1050m above the datum, the required focal length (in mm) of the camera is
- 311 mark · MCQ · EasyWhat is the CORRECT match between the survey instruments/parts of instruments shown in the table and the operations carried out with them?
- 321 mark · MCQ · EasyTo finalize the direction of a survey, four surveyors set up a theodolite at a station P and performed all the temporary adjustments. From the station P, each of the surveyors observed the bearing to a tower located at station Q with the same instrument without shifting it. The bearings observed by the surveyors are 30∘ 30′ 00′′, 30∘ 29′ 40′′, 30∘ 30′ 20′′ and 30∘ 31′ 20′′. Assuming that each measurement is taken with equal precision, the most probable value of the bearing is
- 331 mark · NAT · ModerateThe steel angle section shown in the figure has elastic section modulus of 150.92cm3 about the horizontal X−X axis, which passes through the centroid of the section.
- 341 mark · NAT · EasyA reinforced concrete pile of 10m length and 0.7m diameter is embedded in a saturated pure clay with unit cohesion of 50kPa. If the adhesion factor is 0.5, the net ultimate uplift pullout capacity (in kN) of the pile is ____ (rounded off to the nearest integer).
- 351 mark · NAT · EasyA 2m wide rectangular channel is carrying a discharge of 30m3/s at a bed slope of 1 in 300. Assuming the energy correction factor as 1.1 and acceleration due to gravity as 10m/s2, the critical depth of flow (in meters) is ____ (rounded off to 2 decimal places).
- 362 marks · MCQ · EasyIn a sample of 100 heart patients, each patient has 80% chance of having a heart attack without medicine X. It is clinically known that medicine X reduces the probability of having a heart attack by 50%. Medicine X is taken by 50 of these 100 patients. The probability that a randomly selected patient, out of the 100 patients, takes medicine X and has a heart attack is
- 372 marks · MCQ · ModerateA linearly elastic beam of length 2l with flexural rigidity EI has negligible mass. A massless spring with a spring constant k and a rigid block of mass m are attached to the beam as shown in the figure.
- 382 marks · MCQ · ModerateA critical activity in a project is estimated to take 15 days to complete at a cost of Rs. 30,000. The activity can be expedited to complete in 12 days by spending a total amount of Rs. 54,000. Consider the statements P and Q.
- 392 marks · MCQ · ModerateA homogeneous, prismatic, linearly elastic steel bar fixed at both the ends has a slenderness ratio (l/r) of 105, where l is the bar length and r is the radius of gyration. The coefficient of thermal expansion of steel is 12×10−6/∘C. Consider the effective length of the steel bar as 0.5l and neglect the self-weight of the bar.
- 402 marks · MCQ · EasyConsider the statements P and Q related to the analysis/design of retaining walls.
- 412 marks · MCQ · ModerateA round-bottom triangular lined canal is to be laid at a slope of 1 in 1500, to carry a discharge of 25m3/s. The side slopes of the canal cross-section are to be kept at 1.25H:1V. If Manning’s roughness coefficient is 0.013, the flow depth (in meters) will be in the range of
- 422 marks · MCQ · ModerateA hypothetical multimedia filter, consisting of anthracite particles (specific gravity: 1.50), silica sand (specific gravity: 2.60), and ilmenite sand (specific gravity: 4.20), is to be designed for treating water/wastewater. After backwashing, the particles should settle forming three layers: coarse anthracite particles at the top of the bed, silica sand in the middle, and small ilmenite sand particles at the bottom of the bed.
- 432 marks · MCQ · ModerateThe consolidated data of a spot speed study for a certain stretch of a highway is given in the table.
- 442 marks · MSQ · ModerateThree vectors p, q, and r are given as
p=^+^+k^
q=^+2^+3k^
r=2^+3^+4k^
- 452 marks · MSQ · ModerateConsider the statements P, Q , and R.
- 462 marks · MSQ · HardIn the context of pavement material characterization, the CORRECT statement(s) is/are
- 472 marks · NAT · EasyThe expression for computing the effective interest rate (ieff) using continuous compounding for a nominal interest rate of 5% is
- 482 marks · NAT · EasyConsider two matrices A=[211043] and B=−121034.
- 492 marks · NAT · ModerateFor the 6m long horizontal cantilever beam PQR shown in the figure, Q is the mid-point. Segment PQ of the beam has flexural rigidity EI=2×105kN⋅m2 whereas the segment QR has infinite flexural rigidity. Segment QR is subjected to uniformly distributed, vertically downward load of 5kN/m.
- 502 marks · NAT · EasyThe horizontal beam PQRS shown in the figure has a fixed support at point P, an internal hinge at point Q, and a pin support at point R. A concentrated vertically downward load (V) of 10kN can act at any point over the entire length of the beam.
- 512 marks · NAT · ModerateA concrete column section of size 300mm×500mm as shown in the figure is subjected to both axial compression and bending along the major axis. The depth of the neutral axis (Xu) is 1.1 times the depth of the column, as shown.
- 522 marks · NAT · ModerateThe table shows the activities and their durations and dependencies in a project.
- 532 marks · NAT · ModerateA homogeneous earth dam has a maximum water head difference of 15m between the upstream and downstream sides. A flownet was drawn with the number of potential drops as 10 and the average length of the element as 3m. Specific gravity of the soil is 2.65. For a factor of safety of 2.0 against piping failure, void ratio of the soil is ____ (rounded off to 2 decimal places).
- 542 marks · NAT · ModerateThe in-situ percentage of voids of a sand deposit is 50%. The maximum and minimum densities of sand determined from the laboratory tests are 1.8g/cm3 and 1.3g/cm3, respectively. Assume the specific gravity of sand as 2.7.
- 552 marks · NAT · ModerateA drained triaxial test was conducted on a saturated sand specimen using a stress-path triaxial testing system. The specimen failed when the axial stress reached a value of 100kN/m2 from an initial confining pressure of 300kN/m2.
- 562 marks · NAT · ModerateA storm with a recorded precipitation of 11.0cm, as shown in the table, produced a direct run-off of 6.0cm.
- 572 marks · NAT · ModerateA 500m long water distribution pipeline P with diameter 1.0m, is used to convey 0.1m3/s of flow. A new pipeline Q, with the same length and flow rate, is to replace P. The friction factors for P and Q are 0.04 and 0.01, respectively. The diameter of the pipeline Q (in meters) is ____ (rounded off to 2 decimal places).
- 582 marks · NAT · ModerateA 2m×1.5m tank of 6m height is provided with a 100mm diameter orifice at the center of its base. The orifice is plugged and the tank is filled up to 5m height. Consider the average value of discharge coefficient as 0.6 and acceleration due to gravity (g) as 10m/s2. After unplugging the orifice, the time (in seconds) taken for the water level to drop from 5m to 3.5m under free discharge condition is ____ (rounded off to 2 decimal places).
- 592 marks · NAT · HardA rectangular channel is 4.0m wide and carries a discharge of 2.0m3/s with a depth of 0.4m. The channel transitions to a maximum width contraction at a downstream location, without influencing the upstream flow conditions. The width (in meters) at the maximum contraction is ____ (rounded off to 2 decimal places).
- 602 marks · NAT · ModerateA circular settling tank is to be designed for primary treatment of sewage at a flow rate of 10 million liters/day. Assume a detention period of 2.0hours and surface loading rate of 40000liters/m2/day. The height (in meters) of the water column in the tank is ____ (rounded off to 2 decimal places).
- 612 marks · NAT · EasyAn organic waste is represented as C240O200H180N5S.
- 622 marks · NAT · ModerateA horizontal curve of radius 1080m (with transition curves on either side) in a Broad Gauge railway track is designed and constructed for an equilibrium speed of 70kmph. However, a few years after construction, the Railway Authorities decided to run express trains on this track. The maximum allowable cant deficiency is 10cm.
- 632 marks · NAT · HardA vertical summit curve on a freight corridor is formed at the intersection of two gradients, +3.0% and −5.0%.
- 642 marks · NAT · ModerateA child walks on a level surface from point P to point Q at a bearing of 30∘, from point Q to point R at a bearing of 90∘ and then directly returns to the starting point P at a bearing of 240∘. The straight-line paths PQ and QR are 4m each. Assuming that all bearings are measured from the magnetic north in degrees, the straight-line path length RP (in meters) is ____ (rounded off to the nearest integer).
- 652 marks · NAT · ModerateDifferential levelling is carried out from point P (BM: +200.000m) to point R. The readings taken are given in the table.